Download >>> https://byltly.com/282hn4
The Cutok Dc330 Driver is designed to replace standard DC motors in various applications.When correctly configured, this driver can reduce power consumption by up to 75%, which makes it ideal for high-speed, low-torque applications. Manufactured in the United States at an ISO 9001 plant, these drivers are backed by a two-year warranty and come preloaded with software templates for Scada motion control systems. High speed, low cost PWM Control: The Cutok driver has a maximum operating frequency of 330 kHz. For example, a 100 kW Cutok driver could be configured to run at 100 kHz and produce the same torque as an 800 kW DC motor running at 8.3 kHz. This allows for faster machine cycle times and higher production rates while consuming less power and saving space in the machine. The benefit is that extreme power savings can be realized in applications where gross torque requirements are low (0~50 Nm) and speeds are high (800~3600 RPM). This driver can also be configured to control the motor with a maximum of one-third or less of its maximum power rating. High precision PWM Control: For applications requiring the utmost accuracy in motor application, the driver allows for precision control using an input pulse width modulation (PWM) technique. The Cutok driver includes one interrupt channel that is accurately phase-locked to the leading edge of phase 4.2. This enables precise motor control without losses caused by an analog phase detector driving a PWM inverter that often occurs in other devices. The phase 4. 2 signal also eliminates the need for a phase lock loop (PLL) and associated IC chips which add to the cost and size of the device. The phase lock loop speed is 4MHz while the PWM speed is 330 kHz. High power, wide range motor control: The driver contains a full-scale analog input that can be used to compare measured shaft voltages with a 5-bit digital scale. An internal thermistor and an optical encoder provide real-time feedback from shaft position. This feedback can be used to adjust individual motor parameters such as maximum torque, slew rate, acceleration/decay rates, motor start delay or drive sequencing. Software control with Scada: The Cutok driver features extensive software control capability, enabling it to be programmed in any Scada environment with which the device is compatible. With this flexibility, cut corners can be easily eliminated to create a robust control system for any application in which power savings are needed. The software template includes pre-defined algorithms that provide optimum parameter settings for most linear, rotary motion control systems. Scada Motion Control Distribution (ScadaMotion®): Skilled engineers at Skilled Motion Control (SMC®) will develop custom code for your specific application upon request. cfa1e77820
Comments